Thyracont vacuum gauges and controllers embody many innovative technologies in pressure sensing and signal processing. A wide range of digital vacuum gauges from 1600mbar to 10-9mbar. Thyracont develops and manufactures intelligent vacuum gauges, controllers and combination transducers for industrial as well as laboratory applications. |
 |
Thyracont Compact Digital Vacuum Meters A
wide range of compact digital vacuum meters to measure
from 1600mbar to 10-4mbar. Battery powered with
flange and threaded connections for direct attachment.
Remote sensor versions are also available. |
 |
Thyracont Vacuum Transducers with single or wide range combination sensors to measure and transmit pressures from 1400mbar to 10-9 mbar. Analog and digital output signals. Mounting with KF small flange or conflat flange. |
 |
Thyracont Vacuum Controllers to measure and control vacuum between 1000mbar and 1 mbar. Integrated sensor, automatic boiling point detection and multiple program modes and fuzzy logic for control of vacuum processes and distillations. |
 |
Thyracont Vacuum Switches to sense and switch at pressures between 1000mbar and 0.001mbar. Used to set valves or switch pumps on/off .
|
 |
Diaphragm
Vacuum Gauges use capacitive or piezo resistive
pressure transducers consisting of a silicon diaphragm and
strain
gauges to measure
pressure. Digital and analog display is presented on the
LCD screen. Electrodes do not come into contact with the
measured gas and are thus protected from corrosion.
|
 |
Pirani
Vacuum Gauges use
the thermal conductivity of gas ( Pirani Principle) to measure
pressures to 10-3 mbar. Pirani gauges measure
the total pressure of the gas, however the pressure is dependent
on the type of gas. The instruments are calibrated for air
N2. |
 |
Vacuum Controllers are
fully electronic combined gauges and controllers. They allow precise
setting of vacuum and control automatic valves. With the Vacuubrand VARIO
series pumps, controllers control the pump motor speed for efficient
and precise process control.
|
