| Fluoroplastic Vessels |
 |
A wide
range of Bohlender "BOLA" fluoroplastic vessels including beakers,bottles,jars,
dishes, test tubes, flasks and sampling bags. This group also includes
fluoroplastic distillation apparatus and a chemically inert pumps.
Manufactured by Bohlender from PTFE, PFA and PP, the products listed
are available in a wide range of sizes and shapes to suit all laboratory
needs. Select a section to see details of sizes, materials and prices
for BOLA products. |
PTFE,
PFA and PP Beakers, Sample Cups and Lids Made
by Bohlender of fluoroplastic. With spout and reinforced rim, thick-walled,
smooth interior surface. A tight-closing lid with centering shoulders
made of fluoroplastic is additionally available. Sample cups
made of pure polypropylene. Ideal for keeping samples.
Digestion
Vessels BOLA Digestion vessels are made
of pure, isostatically pressed PTFE (TFM). TFM is a modified
PTFE. These Bohlender vessels are suitable for samples
up to max. 0.5 g. |
 |
 |
PTFE,
PFA & FEP Bottles Made of
fluoroplastic. Thick-walled, smooth interior surface, with screw
caps. Wide mouth, narrow mouth and conical designs made by Bohlender..
Wash
Bottles & Scrubber Columns BOLA PFA & FEP
wash bottles graduated. BOLA FEP scrubber columns are
non-porous, transparent and have universal chemical resistance.
A fine-pore frit (approx. 3 µm, with a M 8x1 thread)
disperses the gas that is to be purified by washing.
Scrubber columns are each equipped with 2 PTFE fittings. |
PTFE & PFA Evaporating Dishes, Crucibles & Watch Dishes PTFE & PFA
evaporating dishes in conical and cylindrical shapes, with and without
spouts. Crucibles and watch dishes are PTFE with smooth internal
surfaces made by Bohlender.
|
 |
 |
PTFE
Condensers, Micro Reaction Vessels BOLA Liebig Condensers
and Liebig vacuum condensers
Distillation
Accessories BOLA PFA
Reaction Vessels for small volumes, dropping funnels, flask thermometers,
stirrer bearings. Fluoroplastic distillation heads
Fluoroplastic packed columns and micro reaction vessels
|
| PTFE & PFA
Round Bottom & Erlenmeyer Flasks Fluoroplastic,
non-porous with one standard ground joint center neck and additional
side neck(s) and GL-thread fittings. Allows assembly with temperature
probes, electrodes or tubes. Conditionally suitable for vacuum
depending on combined vacuum and temperature, e.g. at 30 mbar
and a temperature of 50°C. Made by Bohlender. |
 |
 |
PFA
Jars BOLA Jars with round
bottoms.Non porous with screw caps and fittings.
Chemically
Resistant Pump For quick, easy sampling or
transfer of liquids, even from sources that are not easily
accessible. Suitable for use with high viscosity liquids
The sample is only exposed to the PTFE tubing and the collection
bottle. Any glass bottles with GL 32 or GL 45 threads can
be used as collection bottles. Made by Bohlender.
|
| Chemically
Inert Sampling Bags Non-porous,
without plasticizer, absolutely inert, suitable for the storage
of gases and liquids. BOLA bags supplied with a 6mm dia cylindrical
port . Made by Bohlender. |
 |
 |
PTFE & PFA
Test Tube, Vials Fluoroplastic,
non porous with and without screw caps. BOLA fluoroplastic vials,
round inside with either flat or conical bottoms. Made by Bohlender. |
| Threaded
Adapters For connecting different threads, suitable
for Merck bottles with GL 40 and for all PFA, PTFE bottles
and jars with a thread GL 40 or S 40. By using this BOLA adaptor,
dispensers or multiple distributors can be screwed tightly
on fluoroplastic bottles. |
 |
 |
PTFE
Wash Bottles, FEP Scrubbers BOLA
Wash bottles for a wide range of uses. Scrubber columns are made of
FEP, non-porous, transparent and have universal chemical resistance.
A fine-pore frit (approx. 3 µm,
with a M 8x1 thread) disperses the gas that is to be purified by
washing. Made by Bohlender. |
Plastic Reaction Vessel & Soxhlet Extraction Vessels BOLA
Fluoroplastic reaction vessel with smooth sides and flat bottom. Fluoroplastic
Soxhlet extraction apparatus . Made by Bohlender.
|
 |
 |
Culture
Bottles are made of boro
silicate glass. The BOLA fluoroplastic and stainless steel stirrer
is externally adjustable The medium is exposed only to the fluoroplastic
material. The screw cover for the center neck and the screw caps
for the two sidearms are made of a thermoplastic polyester allowing
the entire unit to be sterilized |
|
|
| Hydrolyzing
and Digestion Vessels with exchangeable liners. The liners
are easily interchangeable and allow precise weighted samples.
In most cases the complete vessels would be too heavy for the
balance. In addition, different decompositions can be performed
in only one digestion vessel by using several liners. Made by Bohlender. |
 |
